API 16C Choke Manifold for Oilfield Well Control Equipment , High Standard Choke Manifold
Choke Manifold
1. Application
Choke manifold is necessary device to control the well kick successfully and execute the pressure control technology on oil/gas well in the course of drilling, as it is, the device is adopted to the execute new drilling well's technique of balance pressure, which can prevent the pollution oil-layer,improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can control the finite pressure from casing by adjusting the choke valve's opening, so balance drilling can work under the minimum pressure-difference.
2. Configuration
Our choke manifold is composed of choke valve, gate valve, pipeline, pipe fittings and pressure gage, etc.
3. Working Principle
When well pressure rises, the choke valve (it falls into three kinds: Manually adjustable, hydraulic and positive) on choke manifold can be turned on and off to release the fluid to control casing pressure. Gate valve can be used for direct blowout. When casing pressure is pretty high,
The pressure class of our company's chokes manifold falls into five class: 14MPa, 21MPa, 35MPa, 70MPa and 105MPa. Also, we can design according to customer demand.
4. Specification
Pressure classes 5000psi, 10000psi, 15000psi. Can also be designed according to requirement of client.
Choke manifolds are manufactured according to API Spec 16C.
Working Pressure: 5,000psi ~ 15,000psi
Nominal Bore Size : 2 1/16 - 4- 1/16"
Operating Features of Our Choke Manifold:
- The pressure gauge must be installed.
- In winter, the choke manifold can work under a low temperature condition.
- The working pressure of all components on the choke manifold shall be compatible with that of the BOP stack used.
- The line pipe shall be level and straight as much as it could. In case of the turn of the line pipe, the 120 degree steel bent pipe shall be used. The bore of the line pipe shall be large enough.
- The choke manifold shall be installed at the place where the operator can reach it easily. The pressure test must be performed prior to installation and the seat test pressure shall be equal to the rated working pressure.
Technical Specification of Our Choke Manifold:
| | | | Configuration |
| | | | 5 x Manual Valves
1 x Adj.Choke & 1 x Pos. Choke
1 x Data-header |
| | | | 8 x Manual Valves
1 x Adj.Choke & 1 x Pos. Choke
1 x Data-header |
| | | | 4 x Manual Valves
1 x Adj.Choke & 1 x Pos. Choke
2 x Data-header & 1 x Lifting Arm on Skid |
| | | | 8 x Manual Valves
1 x Adj.Choke & 1 x Pos. Choke
1 x Data-header |
| | | | 8 x Manual Valves
1 x Adj.Choke & 1 x Pos. Choke
1 x Data-header |
| | | | 6 x Manual Valves
4 x Pos. Choke
2 x Skids |
| | | | 2 x Hyd.Valves & 6 x Man. Valves
1 x Adj.Choke & 1 x Pos. Choke
1 x Data-header |
| | | | 8 x Manual Valves
1 x Adj.Choke |
Competitive Advantages
1. We offer high quality products at competitive price.
2. Shortest delivery time.
3. Flexible payment terms.
4. Timely after-sale service.
5. Most of our equipment can be replaceable with international brands.
6. Our products have been exported to Argentina, Egypt, US, Australia, Romania, Pakistan, Dubai, Abu Dhabi, Iran, India, Indonesia, Vietnam, Malaysia and many other countries.
Company Tenet
Customer's satisfaction is the highest pursuit of TR Solids Control.
Product Tags:
|
|
API 16C Choke Manifold For Oilfield Well Control Equipment High Standard Images
|
